You are here: JHS Carpets > ;-- > Chain Mail

Chain Mail specification and colours

 
Click on pictures to view larger image.
 

191604 Chestnut
Request sample

   

191605 Tortoise
Request sample

   

191606 Flint
Request sample

   
 

191618 Slate Stone
Request sample

   

191619 Neptune
Request sample

   

191626 Surf
Request sample

   
 

191635 Black Opal
Request sample

   

191665 Camel
Request sample

   

191684 Sage
Request sample

   
 

191688 Mercury
Request sample

   

Camel
 
Construction Interlocking level loop
Pile Content 89%BCF strudon/11% BCF nylon
Primary Backing Dual bonding
Secondary Backing Secondary
Width 3.66m
Pile Weight 814gm2
Pile height 4mm
Total Weight 1704g/m2
Gauge 50.4rows/10cm
Stitches 30.7stitches/10cm
Density 9.1 kilotex/cm2
Colouration Solution dyed
Ravel test performance Construction prevents ravelling when tested to PTL-CR(centre ravel) and PTL-ER(edge ravel) protocols
Pattern repeat 0.7cm x 1cm approx
Change on wet cleaning Grey scale 5
Static Generation Maximum 3.0kv
Light Fastness L5
Installation For commercial locations this product must be fully adhered to the sub floor strictly in accordance with British Standards BS 5325 2001. The sub floor must be smooth, clean and dry with an adequate damp proof membrane. We recommend the use of F.Ball adhesive or equally approved products. It is essential a check is made to confirm the recommended and approved adhesive prior to fitting. Please check with your local representative or adhesive manufacturer.
Maintenance Vacuum for normal day to day cleaning with suitable industrial cleaner. For commercial cleaning, using dry chemical extraction or the hot water extraction method is recommended when required, depending on local conditions.

Joseph Hamilton & Seaton, Relay Park, Relay Drive, Tamworth, Staffordshire B77 5PR
Telephone: 01827 831400 Facsimile: 01827 831401 email: sales@jhscarpets.com

Joseph Hamilton & Seaton © Copyright 2010