Linea Tile specification and colours

Click on pictures to view larger image.

87103 Beige Request sample	87111 Sand Request sample	87150 Copper Request sample

87309 Oak Request sample	87330 Olive Request sample	87402 AirForceBlue Request sample

87500 Slate Request sample	87505 Charcoal Request sample	87530 SilverBirch Request sample

87750 Saddle Request sample

87402 AirForceBlue

Construction	Texture loop
Pile Content
Primary Backing	Synthetic
Secondary Backing	Eco works
Tile Size	61x61cm
Tufted Weight	2457gm2
Finished pile thickness	3.4544mm
Gauge	1/10th
Dye Method	Solution dyed
Stitches per inch	50 per 10cm
Average density	14.32 Kilotex
Smoke density	Less than 450
Static Generation	Less than3.5kv
Light Fastness	Bs 1006 1990 B02 Better than 6 (scale bad 1 to good 8)
Resistance to change on wet cleaning


Installation:	For commercial locations this product must be fully adhered to the sub floor strictly in accordance with British Standards BS 5325 2001. The sub floor must be smooth, clean and dry with an adequate damp proof membrane. We recommend the use of F.Ball adhesive or equally approved products. It is essential a check is made to confirm the recommended and approved adhesive prior to fitting. Please check with your local representative or adhesive manufacturer.



Maintenance:	Vacuum for normal day to day cleaning with suitable industrial cleaner. For commercial cleaning, using dry chemical extraction or the hot water extraction method is recommended when required, depending on local conditions.


Colours:
87103 BEIGE	87111 SAND
87150 COPPER	87309 OAK
87330 OLIVE	87402 AIRFORCE
87500 SLATE	87505 CHARCOAL
87530 SILVER	87750 SADDLE

Joseph, Hamilton & Seaton - Leaders in Contract Carpets