You are here: JHS Carpets > Resilient Collection > Flexi Tile
Flexi Tile specification and colours |
| |
| Click on pictures to view larger image. |
| |
|
|
Studded |
|
|
| |
Technical
Specification |
Standard |
Units of Measurement |
Flexi-Tile industrial |
Flexi-Tile Commercial/ Domestic |
| Tile Dimensions |
|
|
501 x 501mm
8 tiles per box |
501 x 501mm
8 tiles per box |
| Material |
|
|
PVC SGl1.45 |
PVC SG1.37 |
| Hardness |
ISO 868 |
Shore A |
92 |
75 |
| Abrasion |
DIN53504 |
Nmm2 |
17 |
15 |
| Resistance to wear |
DIN53516 |
Mm3 |
90.6 |
87.9 |
| Flame Spread |
DIN51960 |
|
Class 1 |
Class 1 |
| Fire Resistance |
ANSl/ASTM
E648 979 |
A/NFPA 235
1995 Critical Rad Flux |
Class 1 |
Class 1 |
| Electrical Resistance |
DIN 53582 |
Ohms |
1x10 14 |
1x10 14 |
| Anti-Slip |
ASTMC 1028/89 |
Co-efficient of
Friction |
Good |
Very Good |
| Dimensional Stability |
NF EN404 |
% |
0.40 |
0.40 |
Standard Indentation
Under Load
Load Removed |
NF EN 433 |
mm |
0.11
0.01 |
1.48
0.48
|
Standard Indentation
Under Load
Load Removed |
NF EN 433 |
mm |
0.19
0.08 |
2.21
1.20 |
| Anti-Static |
Special 1 x 10 8 |
Anti-Static Tiles |
|
|
| UV Stability |
|
|
Good |
Good |
| |
|
|
|
|
Anti – static tiles available in all colours. Special UV tiles. Available on request.
UV stabilizer can be added to protect tile from fading during outdoors use. |
| |
|
|
|
|
| Installation |
|
| |
Flexi-Tile is quick and easy to install. It can be laid over any hard surface with minimum or no surface preparation. So long as they are relatively even, sub-floors which are poor, worn and in some cases damp can be quickly upgraded. Flexi-tile is loose laid on the floor and its unique interlocking moulded keys are easily locked into place. No special tools are required – all you need is a mallet, sharp knife ( soft tile), jigsaw (hard tile), measure and a chalk line. |
| |
Installation of Flexi-tile should be commenced from the center of the floor working outwards in a circular pattern. Since Flexi-tile is easy and modular to install it is not necessary to stop any operations during installation. For installations with minimal temperature changes (+/- 5C room temperature) it is necessary to leave a 5mm gap in between the tiles and any fixed point (i.e. wall and machinery) thus allowing tiles free movement to expand and contract. In applications of extreme temperature fluctuations (i.e. +/- 20C room temperature) and, in areas subject to direct sunlight or high temperature it may be necessary to use an adhesive. Please consult with the technical department for further information. |
| |
|
|
|
|
Cleaning & Maintenance |
|
|
|
| |
Flexi-tile impervious surface means that it is also quick and easy to clean, damp mopping, machine or hard scrubber is ideal. To enhance and maintain Flexi-tile appearance 2-3 coats of a sealer should be applied to the tile after installation. Note a full maintenance and cleaning programme is available upon request. |
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
Joseph, Hamilton & Seaton - Leaders in Contract Carpets
